HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 334)

6
.
Apply the settings in the HDLM driver unconfiguration definition file
(/opt/DynamicLinkManager/config/dlmfdrv.unconf) to the HDLM
driver configuration definition file (/kernel/drv/dlmfdrv.conf):
Execute the following command:
# /opt/DynamicLinkManager/bin/dlmsetconf -u
7
.
Execute the dlmcfgmgr utility shown below to make the HDLM driver
recognize the LU to be managed by HDLM:
# /opt/DynamicLinkManager/bin/dlmcfgmgr -a
8
.
Check the status of the path accessing the LU to be managed by HDLM.
The following shows an example of executing the command. The shaded
portion is the path to access the LU to be managed by HDLM.
9
.
Delete the device ID information for devices that do not exist.
Execute the following command:
# /usr/cluster/bin/scdidadm -C
10
.
Allocate the device ID.
Execute the following command:
# /usr/cluster/bin/scdidadm -r
11
.
Notify the node of the most recent device ID information.
Execute the following command:
4-66
HDLM Operation
Hitachi Dynamic Link Manager (for Solaris) User Guide