HP Hitachi Dynamic Link Manager Software Licenses User Manual
Page 170
# eeprom boot-device=/pci@7c0/pci@0/pci@1/pci@0,2/SUNW,qlc@2,1/
fp@0,0/disk@w50060e8010027a80,7:a
For how to set a boot device name, see step 11 in
Migration Environment on page 3-91
of
Procedure for Configuring a Boot
.
For how to obtain a device name to be set for OBP, see the
documentation of the HBA you are using.
8
.
Execute the init command and restart the host.
# init 6
Do not use the reboot command to restart the host.
9
.
Execute the beadm list command to make sure the OS is booted from
the boot device you created named hdlmboot.
Make sure NR is shown in the Active column of the hdlmboot row for the
boot device you created.
# beadm list
BE Active Mountpoint Space Policy Created
-- ------ ---------- ----- ------ -------
hdlmboot NR / 2.12G static 2011-12-06 11:37
solaris R - 2.94G static 2011-11-29 14:42
Configuring a ZFS Boot Disk Environment after the Migration
This subsection describes how to configure a ZFS boot disk environment after
the migration.
Assume that the root pool name of the local boot disk environment before the
migration is rpool and the root pool name of the ZFS boot disk environment
after the migration is hdlmpool.
Migrating a swap device and a dump device to a ZFS boot disk
environment
Migrate a swap device and a dump device to a ZFS boot disk environment.
1
.
Execute the zfs create command to create a swap device for a file
system in the root pool (hdlmpool) after the migration.
The swap device size and the block size vary depending on the operating
environment.
# zfs create -V 4G -b 8k hdlmpool/swap
# swap -a /dev/zvol/dsk/hdlmpool/swap
# swap -d /dev/zvol/dsk/rpool/swap
2
.
Edit the /etc/vfstab file for the ZFS boot disk environment after the
migration to change the swap device definition from the local boot disk in
the environment before the migration to the ZFS boot disk in an
environment after the migration.
An example is shown below.
3-104
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for Solaris) User Guide