HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 204)

# metainit -f d22 1 1 c6t50060E08000436D1d7s1
# metattach d20 d22
# metainit -f d32 1 1 c6t50060E08000436D1d7s6
# metattach d30 d32
13
.
Copy the SVM state database to the boot disk after migration..
# metadb -a c6t50060E08000436D1d6s7
# metadb -a c6t50060E08000436D1d7s7
14
.
Delete the SVM in the pre-migration environment.
# metaclear d100 d101 d102
# metaclear d200 d201 d202
# metaclear d300 d301 d302
# metadb -d c8t50060E08000436D1d4s7
# metadb -d c8t50060E08000436D1d5s7
15
.
Execute the metastat command to confirm that the two-mirror
configuration has been correctly configured.
# metastat
d10: Mirror
Submirror 0: d11
State: Okay
Submirror 1: d12
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 25190400 blocks (12 GB)
d11: Submirror of d10
State: Okay
Size: 25190400 blocks (12 GB)
Stripe 0:
Device Start Block
Dbase State Reloc Hot Spare
/dev/dsk/c8t50060E08000436D1d6s0 0
No Okay Yes
d12: Submirror of d10
State: Okay
Size: 25190400 blocks (12 GB)
Stripe 0:
Device Start Block
Dbase State Reloc Hot Spare
/dev/dsk/c8t50060E08000436D1d7s0 0
No Okay Yes
...
16
.
Remove HDLM.
3-138
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for Solaris) User Guide