HP Hitachi Dynamic Link Manager Software Licenses User Manual
Page 361

Specify the host port number and bus number of the target HBA port: the
numbers are found in the PathName field displayed using the view
operation. Enter a period between these two parameter values. For
details on the view operation, see
view (Displays Information) on page
.
Example
The following example shows how to place online all paths connected
to the HBA port whose host port number is 0001 and bus number is
0000:
When the confirmation message is displayed, the user enters y to
continue, or n to cancel the operation.
# /opt/DynamicLinkManager/bin/dlnkmgr online -hba 0001.0000
KAPL01057-I All the paths which pass the specified HBA will
be changed to the Online status. Is this OK? [y/n]:y
KAPL01061-I 3 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
-hbaid HBA-port-ID
Use this parameter to place online, at one time, all paths that pass
through a specific HBA port. The command will place online all paths
connected to the HBA port that has the specified HBA-port-ID. To display
the HBA port IDs, execute the following view operation:
# /opt/DynamicLinkManager/bin/dlnkmgr view -hba
For details about how to execute the view operation to display the HBA
port IDs, see
To display HBA port information on page 6-70
.
Example
The following example shows how to place online all paths connected
to the HBA port whose HBA-port-ID is 00001.
# /opt/DynamicLinkManager/bin/dlnkmgr online -hbaid 00001
KAPL01104-I All the paths which pass the specified HBA port
will be changed to the Online status. Is this OK? [y/n]:y
KAPL01061-I 15 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
-cha -pathid AutoPATH_ID
Use this parameter to simultaneously place online all paths that pass
through a specific CHA port. The command will place online all paths that
pass through the CHA port in the path specified by the -pathid
parameter. Paths that pass through a specific physical CHA port on a
physical storage system will be online.
Command Reference
6-13
Hitachi Dynamic Link Manager (for Solaris) User Guide