HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 143)

¢
# reboot
¢
boot (at the ok prompt)
When Sun Cluster is being used:
Execute the following command at one of the nodes:
# /usr/cluster/bin/scshutdown -g0 -y
Then, execute the following command at the ok prompt in all nodes:
boot
Note
You must restart the host immediately after a successful upgrade
installation or re-installation has been confirmed.
9
.
Execute the dlnkmgr command's view operation to display the status of
the programs.
The following shows an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys
HDLM Version : x.x.x-xx
Service Pack Version :
Load Balance : on(rr)
Support Cluster :
Elog Level : 3
Elog File Size (KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Intermittent Error Monitor : off
Dynamic I/O Path Control : off(10)
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 4096
HDLM Driver Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
¢
The set values that were effective for each function before the update
are inherited as they are.
If you performed an upgrade installation from HDLM 05-00 or 05-01,
the load-balancing setting will remain on if it was previously set on,
and the algorithm will be rr (round robin). If you performed an
upgrade installation from HDLM 05-02 or later, the setting and
algorithm will be inherited if the load-balancing setting was previously
on. The load-balancing algorithm options are Round Robin, Extended
Round Robin, Least I/O, Extended Least I/Os, Least Blocks, and
Creating an HDLM Environment
3-77
Hitachi Dynamic Link Manager (for Solaris) User Guide