HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 368)

off: Disabled
-lbtype {rr|exrr|lio|exlio|lbk|exlbk}
Specify the algorithm to be used for load balancing.
rr: The Round Robin algorithm
exrr: The Extended Round Robin algorithm
lio: The Least I/Os algorithm
exlio: The Extended Least I/Os algorithm
lbk: The Least Blocks algorithm
exlbk: The Extended Least Blocks algorithm
The type of algorithm specified by the -lbtype parameter remains
stored in the system, even when you disable the load balancing
function by specifying -lb off. Therefore, if you re-enable the load
balancing function without specifying an algorithm, load balancing will
be performed according to the algorithm that is stored in the system.
-ellv error-log-collection-level
Specify the level of error information you want to collect for an error log.
The following shows the log files in which an error log collection level can
be set:
HDLM manager logs:
dlmmgrn.log (n indicates a file number from 1 to 16)
Table 6-3 Values of the Error Log Collection Level on page 6-20
shows the values of the error log collection level.
Table 6-3 Values of the Error Log Collection Level
Value Description
0 Collects no error log.
1 Collects error information at the Error level or higher.
2 Collects error information at the Warning level or higher.
3 Collects error information at the Information level or higher.
4 Collects error information at the Information level or higher
(including maintenance information).
The amount of log information to be output increases as the value of the
setting increases.
As the amount of log information to be output increases, the amount of
time before existing information is overwritten becomes shorter.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr set -ellv 1
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation
6-20
Command Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide