HP Hitachi Dynamic Link Manager Software Licenses User Manual
Page 410
When the -c parameter is specified with the -lu parameter, a summary
of LU configuration information is displayed on one line. The total number
of paths recognized by HDLM and the number of online paths are
displayed for each LU.
You cannot specify the -c parameter together with the -hdev or -pathid
parameter.
For details on the contents of each display item, see
.
The sub-parameters are as follows:
-pstv|-vstv
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating
system is displayed. If neither parameter is specified, information is
displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see
6-10 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-32
.
-t
Omits the title for each information item.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu -c
Product S/N LUs iLU HDevName Paths OnlinePaths
9500V 0051 3 0001 c6t2d0 2 2
0002 c6t2d1 2 2
0003 c6t2d2 2 2
9970/9980 15001 3 0670 c6t5d0 2 1
0671 c6t5d1 2 1
0672 c6t5d2 2 1
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
To display a summary of LU information (by adding items to be
displayed)
-lu -c -item
The items specified with the -item parameter are added to the items to
be displayed by the -lu -c parameter and displayed.
If no value is specified for the -item parameter, all the items that can be
added are displayed. For the contents of each displayed item, see
6-18 Displayed LU Information on page 6-64
.
6-62
Command Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide