The dlmstart utility for configuring hdlm devices, Format, Parameters – HP Hitachi Dynamic Link Manager Software Licenses User Manual
Page 460: Format -30, Parameters -30, Utility, see, The dlmstart utility for configuring
The dlmstart Utility for Configuring HDLM Devices
This utility configures HDLM devices without needing to restart the host
immediately after HDLM is installed. The dlmstart utility for configuring
HDLM devices cannot be executed if HDLM devices are being used. The
dlmstart utility is valid in Solaris 10 or Solaris 11.
Format
/opt/DynamicLinkManager/bin/dlmstart [-t | -h ]
Parameters
-t
Uses the existing HDLM driver configuration definition file (/kernel/drv/
dlmfdrv.conf) to configure HDLM devices. The dlmsetconf utility for
creating the HDLM driver configuration definition file is not executed.
-h
Displays the format of the dlmstart utility.
Examples
Example 1
Parameters are omitted:
This example executes the dlmsetconf utility for creating the HDLM
driver configuration definition file and reloads the HDLM drivers. Then, the
dlmsetconf utility and the dlmcfgmgr utility for managing the HDLM
configuration are executed to configure the HDLM devices.
# /opt/DynamicLinkManager/bin/dlmstart
Example2
The -t parameter is specified:
7-30
Utility Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide