HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 511)

Message
ID
Message Text Explanation
Use the dlnkmgr set operation
to return options settings back to
where you had them.
If the KAPL04033-W message is
not output, restart HDLM
manager.
If the same error occurs, re-
install HDLM.For details on the
view operation, see
view
(Displays Information) on page
6-34 . For details on the set
operation, see set (Sets Up the
Operating Environment) on page
6-17 .
KAPL04010
-E
Could not open the error log file. Details
HDLM manager cannot start
normally (unable to open the
error log file /var/opt/
DynamicLinkManager/log/
dlmmgr[1-16].log).
Action
Check whether another program
is using the file (for example, the
file is being opened in a text
editor), or whether the error log
file has been inadvertently
deleted.
KAPL04011
-E
Could not output the error log file. Details
The log information could not be
output to the error log
file /var/opt/
DynamicLinkManager/log/
dlmmgr[1-16].log.
Action
Make sure that the disk has
enough free capacity.
KAPL04012
-E
Could not create a communication
pipe. RC = aa...aa
Details
HDLM manager could not start
normally because it was unable
to create a pipe file, which is
used in communication with
HDLM commands.
aa...aa: OS error code (decimal
(base-10) number)
Action
Execute the DLMgetras utility for
collecting HDLM error
information, and then contact
your HDLM vendor or the
maintenance company if there is
Messages
8-35
Hitachi Dynamic Link Manager (for Solaris) User Guide