HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 554)

Message
ID
Message Text Explanation
exists. If the directory exists,
delete it by using the following
command:
# rm -rf /var/opt/
DynamicLinkManager
However, if you interrupted an
upgrade installation or re-
installation, do not delete this
directory.
Also, execute the following
command to check the status.
# pkginfo -l DLManager
If partially installed is
displayed for the status, perform
an update installation.
KAPL09238
-W
The specified file is not a normal
one. Fail name = aa...aa
Details
A file other than a normal one (for
example, a directory file or a
special file.) is specified.
aa...aa: Specified file name
(character string)
Action
Specify the correct file, and then
retry the operation.
KAPL09239
-I
The system will now restart. Details
The host will restart because
restart was specified in the
installation information settings
file.
Action
None.
KAPL09241
-W
An attempt to install an HDLM
component failed. Error Code =
aa...aa
Details
An attempt to install an HDLM
component failed.
aa...aa: Error number (decimal
number) that specifies the
executed processing
Action
Depending on the output error
code, take the appropriate action
as shown below. Note that this
requires no particular action,
because HDLM operation is not
affected when linkage with Global
Link Manager is not used.
If the error code is 3 or 100:
Wait a while, and then
execute the HDLM component
8-78
Messages
Hitachi Dynamic Link Manager (for Solaris) User Guide