HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 417)

Displayed item
Description
No summary
displayed
Summary
displayed
paths and take resolve the problem for any paths
that have an error status.
Org-Product -- For HAM environments, the model ID of the storage
system on the secondary volume (S-VOL) is
displayed.
If an HAM environment is not used, a hyphen (-) is
displayed.
Org-
SerialNumbe
r -- For HAM environments, the serial number of the
storage system on the secondary volume (S-VOL) is
displayed.
If an HAM environment is not used, a hyphen (-) is
displayed.
Org-iLU -- For HAM environments, an LU number in the
storage system on the secondary volume (S-VOL) is
displayed.
•
For HUS VM, indicated by a hexadecimal
number. The first two characters of iLU are the
CU number, and the last two characters are the
internal LU number within the CU.
• For Hitachi Virtual Storage Platform, indicated
by a hexadecimal number. The first two
characters of iLU are the number of the logical
DKC (Disk Controller), the middle two numbers
are the CU number, and the last two characters
are the internal LU number within the CU.
If an HAM environment is not used, a hyphen (-) is
displayed.
Legend:
--: Not displayed
#1
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the -lu -item
parameter.
- all was specified.
- No value was specified for the parameter.
#2
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the -lu -c -item
parameter.
- No value was specified for the parameter.
#3
Command Reference
6-69
Hitachi Dynamic Link Manager (for Solaris) User Guide