HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 415)

Displayed item
Description
No summary
displayed
Summary
displayed
series, Hitachi AMS2000 series #3 , Hitachi SMS
series #3 , HUS100 series #3 , or HUS VM all paths are
owner paths.
IO-Count
#1 -- Total I/O count for a path. The maximum value that
can be displayed is 2
32 - 1 (4294967295). If the
total I/O count reaches the maximum value, it is
reset, and the count is re-started from 0.
To reset the IO-Count value to 0, execute the
dlnkmgr command's clear operation. Executing the
clear operation also resets the number of I/O
errors (IO-Errors) to 0. For details on the clear
operation, see clear (Returns the Path Statistics to
the Initial Value) on page 6-3 .
IO-Errors
#1 -- Total I/O error count for a path. The maximum
value that can be displayed is 2
32 - 1
(4294967295). If the total I/O error count reaches
the maximum value, it is reset, and the count is re-
started from 0.
To reset the IO-Errors value to 0, execute the
dlnkmgr command's clear operation. Executing the
clear operation also clears the number of I/O
operations (IO-Count) to 0.
For details on the clear operation, see
clear
(Returns the Path Statistics to the Initial Value) on
page 6-3 .
DNum
#1 -- A hyphen (-) is displayed.
IEP
#1 -- The displayed paths are assumed to be in an
intermittent error status and checked whether those
paths are to be operated for automatic failbacks.
One of the following values is displayed for each
path:
•
-: Indicates that intermittent error monitoring
is disabled or the monitoring time for an
intermittent error is out of range.
• A value of at least 0: Indicates the number of
errors that occurred during intermittent error
monitoring.
• *: Indicates that an intermittent error occurred
(automatic failback does not check the path).
Physical
Device
#1
-- SCSI device configuration information. The names
of the physical device files under the /devices
directory are displayed.
Physical-
LDEV -- The model ID, serial number, and iLU number of a
physical volume are separated by periods and
displayed.
Command Reference
6-67
Hitachi Dynamic Link Manager (for Solaris) User Guide