HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 451)

Format
/opt/DynamicLinkManager/bin/dlmlisthdev input-file-name
Parameters
input-file-name
Specifies, as an input file, the name of the output file that stores the
output result of the dlnkmgr command's view -path operation executed
before HDLM 04-00 or 04-01 was removed. You cannot specify multi-byte
characters.
Examples
Example
Referring to the output results of the dlnkmgr command's view -path
operation, which are saved in the /var/tmp/old_view_path_list.txt
file, results in the creation of a list that shows the correspondences of the
logical device file names of HDLM devices.
# /opt/DynamicLinkManager/bin/dlmlisthdev /var/tmp/
old_view_path_list.txt
When upgrading HDLM 04-00 to a newer version of HDLM in a
Solaris 8 environment
The upgrade procedure is as follows:
1
.
Save the logical device file names of the HDLM devices used in HDLM
04-00.
Before removing HDLM 04-00, execute the dlnkmgr command's view -
path operation to save the output result in a file that has any desired file
name.
# /opt/DynamicLinkManager/bin/dlnkmgr view -path > /var/tmp/
old_view_path_list.txt
2
.
After removing HDLM 04-00, use the reconfiguration option to restart the
host.
3
.
Install a newer version of HDLM.
4
.
To confirm that HDLM has been successfully installed, check the path
configuration in HDLM.
5
.
Create a list that shows the correspondences between the logical device
file names of the HDLM devices in HDLM 04-00 and those in the newer
version of HDLM.
As the input file for the command, specify the file that stores the output
result of the dlnkmgr command's view -path operation executed before
HDLM 04-00 was removed. Executing the following command creates a
list for the correspondence of the logical device file names of the devices
Utility Reference
7-21
Hitachi Dynamic Link Manager (for Solaris) User Guide