HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 367)

Item name Default value Recommended value
Number of error
log files
2 2
Trace level 0: Do not output any trace. 0: Do not output any trace.
Trace file size 1000 (kilobytes) 1000 (kilobytes)
Number of trace
files
4 4
Path health
checking
on
(Interval is 30 minutes.) on (Interval is 30 minutes.)
The recommended checking
interval depends on the operating
environment.
Automatic failback on
(1-minute checking interval) The recommended checking
interval depends on the operating
environment.
Intermittent error
monitoring
off off
Collecting audit log
data
off The recommended value depends
on the operating environment.
Set on, if you want to collect
audit log data.
Audit log facility user local0 to local7
Number of times
the same path can
be used for load
balancing
1 The recommended value depends
on the operating environment.
Number of times
the same path can
be used for
extended load
balancing
100 The recommended value depends
on the operating environment.
Dynamic I/O path
control
#
off
The checking interval is 10
minutes.
off
The recommended checking
interval depends on the operating
environment.
Displaying the
physical storage
system information
off The recommended value depends
on the operating environment.
Set to on if you want to display
the physical storage system
information.
#
This item is applied only when Hitachi AMS2000 series, Hitachi SMS
series, or HUS100 series storage is used.
-lb {on [-lbtype {rr|exrr|lio|exlio|lbk|exlbk}]|off}
Enables or disables load balancing.
on: Enabled
Command Reference
6-19
Hitachi Dynamic Link Manager (for Solaris) User Guide