HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 430)

• Set up the storage system (remove the mapping between the
internal LU and the storage port LUN).
• Terminate the connection between the storage port and the host
HBA port.
• Release the Fibre Channel switch settings.
• Release the settings for the host HBA and for the sd or ssd driver.
For details on how to perform these settings, refer to the
documentation for the HBA being used. You may need to restart the
host, depending on the HBA being used, its drivers, and the path
configuration of the deleted LU.
To Display the Format of the delete Operation
-help
Use this parameter to display the delete operation format.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr delete -help
delete:
Format
dlnkmgr delete -path [-s]
KAPL01001-I The HDLM command completed normally. Operation name
= delete, completion time = yyyy/mm/dd hh:mm:ss
#
6-82
Command Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide