Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 98)

84 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Importing/exporting configurations
4
3. Configure the HTTP Import/Export field to import/export Mobility 5181 Access Point
configuration settings using HTTP.
CAUTION
For HTTP downloads (exports) to be successful, pop-up messages must be disabled.
4. Refer to the Status field to assess the completion of the import/export operation.
Import Configuration Click the Import Configuration button to import the configuration file from
the server with the assigned filename and login information. The system
displays a confirmation window indicating the administrator must log out of
the Mobility 5181 Access Point after the operation completes for the
changes to take effect. Click Yes to continue the operation. Click No to
cancel the configuration file import.
Export Configuration Click the Export Configuration button to export the configuration file from
the server with the assigned filename and login information. If the IP mode
is set to DHCP Client, IP address information is not exported (true for both
LAN1, LAN2 and the WAN port). For LAN1 and LAN2, IP address information
is only exported when the IP mode is set to either static or DHCP Server. For
the WAN port, IP address information is only exported when the This
interface is a DHCP Client checkbox is not selected. The system displays a
confirmation window prompting the administrator to log out of the Mobility
5181 Access Point after the operation completes for the changes to take
effect. Click Yes to continue the operation. Click No to cancel the
configuration file export.
Upload and Apply A
Configuration File Click the Upload and Apply A Configuration File button to upload a
configuration file to this access point using HTTP.
Download Configuration
File Click the Download Configuration File button to download this access
point’s configuration file using HTTP.