Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 222)

208 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
Network LAN, Bridge Commands
BR5181>admin(network.lan.bridge)>
Description
Displays the Mobility 5181 Access Point Bridge submenu.
For an overview of the access point’s mesh networking options using the applet (GUI), see
“Configuring Mesh Networking” on page 359.
BR5181>admin(network.lan.bridge)> show
Description
Displays the mesh bridge configuration parameters for the Mobility 5181 Access Point’s LANs.
Syntax
Example
admin(network.lan.bridge)>show
** LAN1 Bridge Configuration **
Bridge Priority :32768
Hello Time (seconds) :2
Message Age Time (seconds) :20
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds) :300
** LAN2 Bridge Configuration **
Bridge Priority :32768
Hello Time (seconds) :2
Message Age Time (seconds) :20
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds) :300
For an overview of the access point’s mesh networking options using the applet (GUI), see
“Configuring Mesh Networking” on page 359.
show Displays the mesh configuration parameters for the Mobility 5181 Access Point’s LANs.
set Sets the mesh configuration parameters for the Mobility 5181 Access Point’s LANs..
.. Moves to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI and exits the session.
show Displays the mesh bridge
configuration parameters for the Mobility 5181 Access Point’s LANs.