Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 291)

Brocade Mobility 5181 Access Point Product Reference Guide 277
53-1002516-01
Network Commands
8
BR5181>admin(network.wireless.rogue-ap)> set
Description
Defines the Mobility 5181 Access Point ACL rogue AP method.
Syntax
Example
admin(network.wireless.rogue-ap)>
admin(network.wireless.rogue-ap)>set Client-scan enable
admin(network.wireless.rogue-ap)>set interval 10
admin(network.wireless.rogue-ap)>set on-channel disable
admin(network.wireless.rogue-ap)>set detector-scan disable
admin(network.wireless.rogue-ap)>set ABG-scan disable
admin(network.wireless.rogue-ap)>set brocade-ap enable
admin(network.wireless.rogue-ap)>set applst-ageout 10
admin(network.wireless.rogue-ap)>set roglst-ageout 10
admin(network.wireless.rogue-ap)>show
Client Scan : enable
Client Scan Interval : 10 minutes
On Channel : disable
Detector Radio Scan : disable
Auto Authorize Brocade APs : enable
Approved AP age out : 10 minutes
Rogue AP age out : 10 minutes
For information on configuring the Rogue AP options available to the access point using the applet
(GUI), see
“Configuring rogue AP detection” on page 162.
BR5181>admin(network.wireless.rogue-ap.Client-scan)>
Description
Displays the Rogue-AP Client-scan submenu.
set Client-scan Enables or disables to permit Clients to scan for rogue APs.
interval Define an interval for associated Clients to beacon in attempting to locate
rogue APs. Value not available unless Client-scan is enabled.
on-channel Enables or disables on-channel detection.
detector-scan Enables or disables AP detector scan (dual-radio model only).
ABG-scan Enables or disables A/BG Detector Scan Mode.
brocade-ap Enables or disables the Authorize Any AP with a Brocade MAC range.
applst-ageout Sets the approved AP age out time.
roglst-ageout Sets the rogue AP age out time.