Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 300)

286 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
BR5181>admin(network.firewall)> set
Description
Defines the Mobility 5181 Access Point firewall parameters.
Syntax
Example
admin(network.firewall)>set mode enable
admin(network.firewall)>set ftp enable
admin(network.firewall)>set ip enable
admin(network.firewall)>set seq enable
admin(network.firewall)>set src enable
admin(network.firewall)>set syn enable
admin(network.firewall)>set win enable
admin(network.firewall)>show
Firewall Status : enable
Override LAN to WAN Access : disable
Configurable Firewall Filters
ftp bounce attack filter : enable
syn flood attack filter : enable
unaligned ip timestamp filter : enable
source routing attack filter : enable
winnuke attack filter : enable
seq num prediction attack filter : enable
mime flood attack filter : enable
max mime header length : 8192
max mime headers : 16
set mode Enables or disables the firewall.
nat-timeout Defines the NAT timeout value.
syn Enables or disables SYN flood attack check.
src Enables or disables source routing check.
win Enables or disables Winnuke attack check.
ftp Enables or disables FTP bounce attack check.
ip Enables or disables IP unaligned timestamp check.
seq Enables or disables sequence number prediction check.
mime filter Enables or disables MIME flood attack check.
len Sets the max header length in bytes as specified by
(with value in range 256 - 34463).
hdr Sets the max number of headers as specified in
(with value in range 12 - 34463).