Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 89)

Brocade Mobility 5181 Access Point Product Reference Guide 75
53-1002516-01
Configuring SNMP settings
4
1. Select System Configuration - > SNMP Access - > SNMP RF Trap Thresholds from the menu
tree.
2. Configure the RF Trap Thresholds field to define device threshold values for SNMP traps.
NOTE
Average Bit Speed,% of Non-Unicast, Average Signal, Average Retries,% Dropped and %
Undecryptable are not access point statistics.
Pkts/s Enter a maximum threshold for the total throughput in Pps (Packets per
second).
Throughput Set a maximum threshold for the total throughput in Mbps (Megabits per
second).
Average Bit Speed Enter a minimum threshold for the average bit speed in Mbps (Megabits per
second).
Average Signal Enter a minimum threshold for the average signal strength in dBm for each
device.
Average Retries Set a maximum threshold for the average number of retries for each device.