Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 297)

Brocade Mobility 5181 Access Point Product Reference Guide 283
53-1002516-01
Network Commands
8
Network Client Locationing Commands
BR5181>admin(network.wireless.Client-locationing)>
Description
Displays the Client Locationing submenu. The items available under this command include:
BR5181>admin(network.wireless.Client-locationing> show
Description
Displays the Client probe table configuration
Syntax
Example
admin(network.wireless.Client-locationing)>show
Client Probe Table Mode : disable
Client Probe Table Size : 200
admin(network.wireless.Client-locationing)>
BR5181>admin(network.wireless.Client-locationing> set
Description
Defines the Client probe table configuration used for locating Clients.
Syntax
show Displays the current Client Locationing configuration.
set Defines Client Locationing parameters.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show Displays the Client probe table configuration.
set Defines the Client probe table configuration.
mode Enables/disables a Client probe scan for the purposes of Client locationing.
size Defines the number of Clients in the table (the maximum allowed is 200).