Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 326)

312 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
System Commands
8
Example
admin(system.snmp.access)>list acl
-----------------------------------------------------------------------------
index start ip end ip
-----------------------------------------------------------------------------
1 209.236.24.1 209.236.24.46
admin(system.snmp.access)>delete acl all
admin(system.snmp.access)>list acl
-----------------------------------------------------------------------------
index start ip end ip
-----------------------------------------------------------------------------
For information on configuring SNMP access settings using the applet (GUI), see “Configuring
SNMP access control” on page 68.
BR5181>admin(system.snmp.access)> list
Description
Lists SNMP access entries.
Syntax
Example
admin(system.snmp.access)>list acl
----------------------------------------------------------------
index start ip end ip
----------------------------------------------------------------
1 209.236.24.1 209.236.24.46
admin(system.snmp.access)>list v1v2c
----------------------------------------------------------------
index community access oid
----------------------------------------------------------------
1 public read only 1.3.6.1
2 private read/write 1.3.6.1
admin(system.snmp.access)>list v3 2
v3 Deletes entry (1-10) from the v3 user definition list.
all Deletes all entries from the v3 user definition list.
list acl Lists SNMP access control list entries.
v1v2c Lists SNMP v1/v2c configuration.
v3 Lists SNMP v3 user definition with index .
all Lists all SNMP v3 user definitions.