Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 308)

294 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
System Commands
8
Example
admin(system)>restart
********************************WARNING***********************************
** Unsaved configuration changes will be lost when the access point is reset.
** Please be sure to save changes before resetting.
**************************************************************************
Are you sure you want to restart the BR5181?? (yes/no):
BR5181 Boot Firmware Version 2.3.2.0-XXX
Copyright(c) Brocade 2009. All rights reserved.
Press escape key to run boot firmware ........
Power On Self Test
testing ram : pass
testing nor flash : pass
testing nand flash : pass
testing ethernet : pass
For information on restarting the access point using the applet (GUI), see “Configuring system
settings” on page 45.
BR5181>admin(system)>show
Description
Displays high-level system information helpful to differentiate this access point.
Syntax
Example
admin(system)>show
system name : BldgC
system location : Atlanta Field Office
admin email address : [email protected]
system uptime : 0 days 4 hours 41 minutes
BR5181 firmware version : 2.3.2.0-XXX
country code : us
ap-mode : independent
serial number : 05224520500336
admin(system)>
For information on displaying System Settings using the applet (GUI), see “Configuring system
settings” on page 45.
show Displays Mobility 5181 Access Point system information.