Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 360)

346 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
System Commands
8
Export Operation : [ Done ]
Export TFTP Example:
admin(system.config)>set server 192.168.0.101
admin(system.config)>set file config.txt
admin(system.config)>export tftp
Export operation : [ Started ]
Building configuration file : [ Done ]
File transfer : [ In progress ]
File transfer : [ Done ]
Export Operation : [ Done ]
CAUTION
Make sure a copy of the Mobility 5181 Access Point’s current configuration is exported (to a
secure location) before exporting the access point’s configuration, as you will want a valid version
available in case errors are encountered with the configuration export.
For information on importing/exporting access point configurations using the applet (GUI), see
“Importing/exporting configurations” on page 81.
BR5181>admin(system.config)> import
Description
Imports the Mobility 5181 Access Point configuration to the access point. Errors could display as a
result of invaid configuration parameters. Correct the sepcified lines and import the file again until
the import operation is error free.
Syntax
Example
Import FTP Example
admin(system.config>set server 192.168.22.12
admin(system.config>set user myadmin
admin(system.config)>set file config.txt
admin(system.config)>set passwd mysecret
admin(system.config)>import ftp
Import operation : [ Started ]
File transfer : [ In progress ]
File transfer : [ Done ]
Import operation : [ Done ]
Import TFTP Example
admin(system.config)>set server 192.168.0.101
admin(system.config)>set file config.txt
admin(system.config)>import tftp
Import operation : [ Started ]
import ftp Imports the Mobility 5181 Access Point configuration file from the FTP server. Use the set command
to set the server, user, password, and file.
tftp Imports the Mobility 5181 Access Point configuration from the TFTP server. Use the set command to
set the server and file.