Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 88)

74 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Configuring SNMP settings
4
7. Click Apply to save any changes to the SNMP Traps screen. Navigating away from the screen
without clicking the Apply button results in all changes to the screen being lost.
8. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on SNMP Traps screen to the last saved configuration.
9. Click Logout to securely exit the Mobility 5181 Access Point applet. A prompt displays
confirming the logout before the applet is closed.
Configuring SNMP RF trap thresholds
Use the SNMP RF Trap Threshold screen as a means to track RF activity and the Mobility 5181
Access Point’s radio and associated Client performance. SNMP RF Traps are sent when RF traffic
exceeds defined limits set in the RF Trap Thresholds field of the SNMP RF Traps screen. Thresholds
are displayed for the Mobility 5181 Access Point, WLAN, selected radio and the associated Client.
To configure specific SNMP RF Traps on the Mobility 5181 Access Point:
Enable All Select this button to enable each trap defined within the SNMP Traps
screen. Once the changes are applied, each event listed will generate a trap
upon its occurrence.
Disable All Select this button to disable each trap defined within the SNMP Traps
screen. Once the changes are applied, none of the events listed will
generate a trap upon their occurrence.