Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 359)

Brocade Mobility 5181 Access Point Product Reference Guide 345
53-1002516-01
System Commands
8
Syntax
Example
admin(system.config)>set server 192.168.22.12
admin(system.config)>set user myadmin
admin(system.config>set passwd georges
admin(system.config)>show
cfg filename : cfg.txt
cfg filepath :
ftp/tftp server ip address : 192.168.22.12
ftp user name : myadmin
ftp password : *******
For information on importing/exporting access point configurations using the applet (GUI), see
“Importing/exporting configurations” on page 81.
BR5181>admin(system.config)> export
Description
Exports the configuration from the system.
Syntax
Example
Export FTP Example:
admin(system.config)>set server 192.168.22.12
admin(system.config)>set user myadmin
admin(system.config)>set file config.txt
admin(system.config)>set passwd
admin(system.config)>export ftp
Export operation : [ Started ]
Building configuration file : [ Done ]
File transfer : [ In progress ]
File transfer : [ Done ]
set file Sets the configuration file name (1 to 39 characters in length).
path Defines the path used for the configuration file upload.
server Sets the FTP/TFTP server IP address.
user Sets the FTP user name (1 to 39 characters in length).
passwd Sets the FTP password (1 to 39 characters in length).
export ftp Exports the Mobility 5181 Access Point configuration to the FTP server. Use the set
command to set the server, user, password, and file name before using this command.
tftp Exports the Mobility 5181 Access Point configuration to the TFTP server. Use the set
command to set the IP address for the TFTP server before using the command.
terminal Exports the Mobility 5181 Access Point configuration to a terminal.