Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 301)

Brocade Mobility 5181 Access Point Product Reference Guide 287
53-1002516-01
Network Commands
8
BR5181>admin(network.firewall)> access
Description
Enables or disables firewall permissions through LAN to WAN ports.
Syntax
Example
admin(network.firewall.lan-wan-access)>list
-----------------------------------------------------------------------------
index from to name prot start port end port
-----------------------------------------------------------------------------
1 lan wan HTTP tcp 80 80
2 lan wan abc udp 0 0
3 lan wan 123456 ah 1440 2048
4 lan wan 654321 tcp 2048 2048
5 lan wan abc ah 100 1000
For information on configuring the Firewall options available to the access point using the applet
(GUI), see
“Configuring firewall settings” on page 146.
BR5181>admin(network.firewall)> advanced
Description
Displays whether an Mobility 5181 Access Point firewall rule is intended for inbound traffic to an
interface or outbound traffic from that interface..
Syntax
show Displays LAN to WAN access rules.
set Sets LAN to WAN access rules.
add Adds LAN to WAN exception rules.
delete Deletes LAN to WAN access exception rules.
list Displays LAN to WAN access exception rules.
.. Goes to parent menu
/ Goes to root menu.
save Saves configuration to system flash.
quit Quits and exits the CLI session.
show Shows advanced subnet access parameters.
set Sets advanced subnet access parameters.
import Imports rules from subnet access.
inbound Goes to the Inbound Firewall Rules submenu.