Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) User Manual
Page 277
Brocade Mobility 5181 Access Point Product Reference Guide
263
53-1002516-01
Network Commands
8
Syntax
Example
admin(network.wireless.radio.radio1)>show radio
Radio Setting Information
Placement
: indoor
MAC Address
: 00A0F8715920
Radio Type
: 802.11b/g
ERP Protection
: Off
Channel Setting
: user selection
ACS Exception Channel List
:
Antenna Diversity
: full
Power Level
: 5 dbm (4 mW)
802.11b/g mode
: B-Only
Basic Rates
: 1 2 5.5 11
Supported Rates
: 1 2 5.5 11
Beacon Interval
: 100 K-usec
DTIM Interval per BSSID
1
: 10 beacon intvls
2
: 10 beacon intvls
3
: 10 beacon intvls
4
: 10 beacon intvls
short preamble
: disable
RTS Threshold
: 2341 bytes
Extended Range
: 0 miles
QBSS Channel Util Beacon Intervl : 10 beacon intvls
QBSS Load Element Mode
: enable
admin(network.wireless.radio.radio1)>show qos
Radio QOS Parameter Set
11g-default
-----------------------------------------------------------------------------
Access Category
CWMin
CWMax
AIFSN
TXOPs (32 usec) TXOPs ms
-----------------------------------------------------------------------------
Background
15
1023
7
0
0.000
Best Effort
15
63
3
31
0.992
Video
7
15
1
94
3.008
Voice
3
7
1
47
1.504
CAUTION
If you do NOT include the index number (for example, "set dtim 50"), the DTIMs for all four BSSIDs
will be changed to 50. To change individual DTIMs for BSSIDs, specify the BSS Index number (for
example, "set dtim 2 50). This will change the DTIM for BSSID 2 to 50.
For information on configuring the Radio 1 Configuration options available to the access point
using the applet (GUI), see
“Configuring a WLAN Access Control List (ACL)”
show
radio
Displays specific 802.11b/g radio settings.
qos
Displays specific 802.11b/g radio WMM QoS settings.