Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 355)

Brocade Mobility 5181 Access Point Product Reference Guide 341
53-1002516-01
System Commands
8
Syntax
admin(system.logs)>set mode enable
admin(system.logs)>set level L4
admin(system.logs)>set ipadr 157.235.112.11
For information on configuring logging settings using the applet (GUI), see “Logging configuration”
on page 79.
>admin(system.logs)> view
Description
Displays the Mobility 5181 Access Point system log file.
Syntax
Example
admin(system.logs)>view
Jan 7 16:14:00 (none) syslogd 1.4.1: restart (remote reception).
Jan 7 16:14:10 (none) klogd: :ps log:fc: queue maintenance
Jan 7 16:14:41 (none) klogd: :ps log:fc: queue maintenance
Jan 7 16:15:43 (none) last message repeated 2 times
Jan 7 16:16:01 (none) CC: 4:16pm up 6 days, 16:16, load average: 0.00,
0.01,
0.00
Jan 7 16:16:01 (none) CC: Mem: 62384 32520 29864
0 0
Jan 7 16:16:01 (none) CC: 0000077e 0012e95b 0000d843 00000000 00000003
0000121
e 00000000 00000000 0037ebf7 000034dc 00000000 00000000 00000000
Jan 7 16:16:13 (none) klogd: :ps log:fc: queue maintenance
Jan 7 16:16:44 (none) klogd: :ps log:fc: queue maintenance
Jan 7 16:17:15 (none) klogd: :ps log:fc: queue maintenance
Jan 7 16:17:15 (none) klogd: :ps log:fc: queue maintenance
set level Sets the level of the events that will be logged. All events with a level at or above
(L0-L7) will be saved to the system log.
L0:Emergency
L1:Alert
L2:Critical
L3:Errors
L4:Warning
L5:Notice
L6:Info (default setting)
L7:Debug
mode Enables or disables syslog server logging.
ipadr Sets the external syslog server IP address to (a.b.c.d).
view Displays the entire Mobility 5181 Access Point system log file.