Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 351)

Brocade Mobility 5181 Access Point Product Reference Guide 337
53-1002516-01
System Commands
8
System Network Time Protocol (NTP) Commands
BR5181>admin(system)> ntp
Description
Displays the NTP menu. The correct network time is required for numerous functions to be
configured accurately on the Mobility 5181 Access Point.
Syntax
For information on configuring NTP using the applet (GUI), see “Configuring Network Time Protocol
(NTP)” on page 76.
BR5181>admin(system.ntp)> show
Description
Displays the NTP server configuration.
Syntax
Example
admin(system.ntp)>show
current time (UTC) : 2006-07-31 14:35:20
Time Zone:
ntp mode : enable
preferred Time server ip : 203.21.37.18
preferred Time server port : 123
first alternate server ip : 203.21.37.19
first alternate server port : 123
second alternate server ip : 0.0.0.0
second alternate server port : 123
synchronization interval : 15 minutes
show Shows NTP parameters settings.
date-zone Show date, time and time zone.
zone-list Displays list of time zones.
set Sets NTP parameters.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show Shows all NTP server settings.