Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 245)

Brocade Mobility 5181 Access Point Product Reference Guide 231
53-1002516-01
Network Commands
8
For information on configuring VPN using the applet (GUI), see “Configuring VPN tunnels” on
page 151.
salife Defines the name of the tunnnel the Security
Association Life Time <300-65535> applies to in
seconds.
ike opmode Sets the Operation Mode of IKE for to Main or
Aggr(essive).
myidtype Sets the Local ID type for IKE authentication for
(1 to 13 characters) to (IP, FQDN, or
UFQDN).
remidtyp
e Sets the Remote ID type for IKE authentication for
(1 to 13 characters) to (IP, FQDN, or
UFQDN).
myiddata Sets the Local ID data for IKE authentication for
to . This value is not required when
the ID type is set to IP.
remiddat
a Sets the Local ID data for IKE authentication for
to . This value is not required when
the ID type is set to IP.
authtype Sets the IKE Authentication type for to
( PSK or RSA).
authalgo Sets the IKE Authentication Algorithm for to
MD5 or SHA1.
phrase Sets the IKE Authentication passphrase for to
.
encalgo Sets the IKE Encryption Algorithm for to
(one of DES, 3DES, AES128, AES192, or
AES256).
lifetime Sets the IKE Key life time in seconds for to
.
group Sets the IKE Diffie-Hellman Group for to either
G768 or G1024.