Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 364)

350 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Statistics Commands
8
Statistics Commands
BR5181>admin(stats)
Description
Displays the Mobility 5181 Access Point statistics submenu. The items available under this
command are:
BR5181>admin(stats)> show
Description
Displays Mobility 5181 Access Point system information.
Syntax
show Displays Mobility 5181 Access Point WLAN, Client, LAN and WAN statistics.
send-cfg-ap Sends a config file to another access point within the known AP table.
send-cfg-all Sends a config file to all access points within the known AP table.
clear Clears all statistic counters to zero.
flash-all-leds Starts and stops the flashing of all Mobility 5181 Access Point LEDs.
echo Defines the parameters for pinging a designated station.
ping Iniates a ping test.
.. Moves to the parent menu.
/ Goes to the root menu.
save Saves the current configuration to system flash.
quit Quits the CLI.
show wan Displays stats for the Mobility 5181 Access Point WAN port.
leases Displays the leases issued by the Mobility 5181 Access Point.
lan Displays stats for the Mobility 5181 Access Point LAN port
stp Displays LAN Spanning Tree Status
wlan Displays WLAN status and statistics summary.
s-wlan Displays status and statistics for an individual WLAN
radio Displays a radio statistics transmit and receive summary.
s-radio Displays radio statistics for a single radio
retry-hgram Displays a radio’s retry histogram statistics.
Client Displays all mobile unit (Client) status.