Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 223)

Brocade Mobility 5181 Access Point Product Reference Guide 209
53-1002516-01
Network Commands
8
BR5181>admin(network.lan.bridge)> set
Description
Sets the mesh configuration parameters for the Mobility 5181 Access Point’s LANs.
Syntax
Example
admin(network.lan.bridge)>set priority 2 32768
admin(network.lan.bridge)>set hello 2 2
admin(network.lan.bridge)>set msgage 2 20
admin(network.lan.bridge)>set fwddelay 2 15
admin(network.lan.bridge)>set ageout 2 300
admin(network.lan.bridge)>show
** LAN1 Mesh Configuration **
Bridge Priority :32768
Hello Time (seconds) :2
Message Age Time (seconds) :20
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds) :300
** LAN2 Mesh Configuration **
Bridge Priority :32768
Hello Time (seconds) :2
Message Age Time (seconds) :20
Forward Delay Time (seconds) :15
Entry Ageout Time (seconds) :300
For an overview of the access point’s mesh networking options using the applet (GUI), see
“Configuring Mesh Networking” on page 359.
set priority Sets bridge priority time in seconds (0-65535) for specified LAN.
hello Sets bridge hello time in seconds (0-10) for specified LAN.
msgage Sets bridge message age time in seconds (6-40) for specified LAN.
fwddelay Sets bridge forward delay time in seconds (4-30) for specified LAN.
ageout Sets bridge forward table entry time in seconds (4-3600) for specified
LAN.