Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 214)

200 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Admin and Common Commands
8
Accessing the CLI via Telnet
To connect to the Mobility 5181 Access Point CLI through a Telnet connection:
1. If this is your first time connecting to your access point, keep in mind the access point uses a
static IP WAN address (10.1.1.1). Additionally, the access point’s LAN port is set as a DHCP
client.
2. Enter the default username of admin and the default password of admin123. If this is your first
time logging into the access point, you are unable to access any of the access point’s
commands until the country code is set. A new password will also need to be created.
Admin and Common Commands
BR5181>admin>
Description
Displays admin configuration options. The items available under this command are shown below.
Syntax
BR5181>admin>help
Description
Displays general CLI user interface help.
Syntax
Example
admin> help
help Displays general user interface help.
passwd Changes the admin password.
summary Shows a system summary.
network Goes to the network submenu
system Goes to the system submenu.
stats Goes to the stats submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
help Displays command line help using combinations of function keys for navigation.