Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 286)

272 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
For information on configuring the WLAN QoS options available to the access point using the applet
(GUI), see
“Setting the WLAN Quality of Service (QoS) policy” on page 111.
BR5181>admin(network.wireless.qos.create)>
Description
Defines an Mobility 5181 Access Point QoS policy.
Syntax
For information on configuring the WLAN QoS options available to the access point using the applet
(GUI), see
“Setting the WLAN Quality of Service (QoS) policy” on page 111.
BR5181>admin(network.wireless.qos.edit)>
Description
Edits the properties of an existing QoS policy.
show Displays QoS policy parameters.
set qos-name Sets the QoS name for the specified index entry.
vop Enables or disables support (by index) for legacy VOIP
devices.
mcast Defines primary and secondary Multicast MAC address.
wmm-qos Enables or disables the QoS policy index specified.
param-set Defines the data type used with the qos policy and
mesh network. When set to a value other then manual,
editing the access category values is not necessary.
Options include; 11g-default, 11b-default, 11g-wifi,
11b-wifi, 11g-voice, 11b-voice or manual for advanced
users).
cwmin category> Defines Minimum Contention Window (CW-Min) for
specified access categoiry and index.
cwmax category> Defines Maximum Contention Window (CW-Max) for
specified access categoiry and index.
aifsn category> Sets Arbitrary Inter-Frame Space Number (AIFSN) for
specified access categoiry and index.
txops category> Configures Opportunity to Transmit Time (TXOPs Time)
for specified access categoiry and index.
default Defines CWMIN, CWMAX, AIFSN and TXOPs default
values.
add-policy Completes the policy edit and exits the session.
.. Cancels the changes and exits.