Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 240)

226 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
1 157.235.91.2
2 10.1.1.1
For an overview of the NAT options available using the applet (GUI), see “Configuring Network
Address Translation (NAT) settings” on page 103.
BR5181>admin(network.wan.nat)> add
Description
Adds NAT entries.
Syntax
Example
admin(network.wan.nat)>add 1 indoors udp 20 29 10.10.2.2
admin(network.wan.nat)>list 1
-----------------------------------------------------------------------------
index name prot start port end port internal ip translation
port
-----------------------------------------------------------------------------
1 indoor udp 20 29 10.10.2.2 0
Related Commands
For an overview of the NAT options available using the applet (GUI), see “Configuring Network
Address Translation (NAT) settings” on page 103.
BR5181>admin(network.wan.nat)> delete
Description
Deletes NAT entries.
add
Sets an inbound network address translation (NAT) for WAN address , where is the name of
the entry (1 to 7 characters), is the transport protocol (one of tcp, udp, icmp, ah, esp, gre, or all),
is the starting port number in a port range, is the ending port number in a port range,
is the internal IP address, and is the (optional) internal translation port.
delete Deletes one of the inbound NAT entries from the list.
list Displays the list of inbound NAT entries.