Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 52)

38 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Basic device configuration
3
Enter the current password and a new admin password in fields provided. Click Apply. Once the
admin password has been updated, a warning message displays stating the access point must
be set to a country.
The export function will always export the encrypted Admin User password. The import function
will import the Admin Password only if the access point is set to factory default. If the access
point is not configured to factory default settings, the Admin User password WILL NOT get
imported.
NOTE
Though the Mobility 5181 Access Point can have its basic settings defined using a number of
different screens, Brocade recommends using the Mobility 5181 Access Point Quick Setup
screen to set the correct country of operation and define its minimum required configuration
from one convenient location.
Configuring device settings
Configure a set of minimum required device settings within the Quick Setup screen. The values
defined within the Quick Setup screen are also configurable in numerous other locations within the
menu tree. When you change the settings in the Quick Setup screen, the values also change within
the screen where these parameters also exist. Additionally, if the values are updated in these other
screens, the values initially set within the Quick Setup screen will be updated.
To define a basic access point configuration:
1. Select System Configuration -> Quick Setup from the menu tree, if the Quick Setup screen is
not already displayed.
2. Enter a System Name for the Mobility 5181 Access Point.