Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 229)

Brocade Mobility 5181 Access Point Product Reference Guide 215
53-1002516-01
Network Commands
8
BR5181>admin(network.lan.dhcp)> set
Description
Sets DHCP parameters for the LAN port.
Syntax
Example
admin(network.lan.dhcp)>set range 1 192.168.0.100 192.168.0.254
admin(network.lan.dhcp)>set lease 1 86400
admin(network.lan.dhcp)>show
**LAN1 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address : 192.168.0.100
Ending IP Address : 192.168.0.254
Lease Time : 86400
For information on configuring DHCP using the applet (GUI), see “Configuring the LAN interface” on
page 93.
BR5181>admin(network.lan.dhcp)> add
Description
Adds static DHCP address assignments.
Syntax
Example
admin(network.lan.dhcp)>add 1 00A0F8112233 192.160.24.6
admin(network.lan.dhcp)>add 1 00A0F1112234 192.169.24.7
admin(network.lan.dhcp)>list 1
-----------------------------------------------------------------------------
Index MAC Address IP Address
-----------------------------------------------------------------------------
1 00A0F8112233 192.160.24.6
2 00A0F8112234 192.169.24.7
For information on adding client MAC and IP address information using the applet (GUI), see
“Configuring Advanced DHCP Server Settings” on page 99.
set range Sets the DHCP assignment range from IP address to IP address
for the specified LAN.
lease Sets the DHCP lease time in seconds (1-999999) for the
specified LAN.
add Adds a reserved static IP address to a MAC address for the specified LAN.