Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 309)

Brocade Mobility 5181 Access Point Product Reference Guide 295
53-1002516-01
System Commands
8
BR5181>admin(system)>set
Description
Sets Mobility 5181 Access Point system parameters.
Syntax
For information on configuring System Settings using the applet (GUI), see “Configuring system
settings” on page 45.
BR5181>admin(system)>lastpw
Description
Displays last expired debug password.
Example
admin(system)>lastpw
BR5181 MAC Address is 00:15:70:02:7A:66
Last debug password was brocade
Current debug password used 0 times, valid 4 more time(s)
admin(system)>
BR5181>admin(system)>arp
Description
Dispalys the access point’s arp table.
Example
admin(system)>arp
Address HWtype HWaddress Flags
Mask Iface
157.235.92.210 ether 00:11:25:14:61:A8 C ixp1
157.235.92.179 ether 00:14:22:F3:D7:39 C ixp1
157.235.92.248 ether 00:11:25:B2:09:60 C ixp1
157.235.92.180 ether 00:0D:60:D0:06:90 C ixp1
set name Sets the Mobility 5181 Access Point system name to (1 to 59
characters). The access point does not allow intermediate space characters
between characters within the system name. For example, “BR5181 sales”
must be changed to “BR5181sales” to be a valid system name.
loc Sets the Mobility 5181 Access Point system location to (1 to 59
characters).
email Sets the Mobility 5181 Access Point admin email address to (1 to 59
characters).
cc Sets the Mobility 5181 Access Point country code using two-letters .