Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 366)

352 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Statistics Commands
8
NOTE
The send-cfg-ap command copies all existing configuration parameters except Mesh settings, LAN
IP data, WAN IP data and DHCP Server parameter information.
For information on copying the access point config to another access point using the applet (GUI),
see
“Viewing known access point statistics” on page 196.
BR5181>admin(stats)> send-cfg-all
Description
Copies the Mobility 5181 Access Point’s configuration to all of the Mobility 5181 Access Points
within the known AP table.
Syntax
Example
admin(stats)>send-cfg-all
admin(stats)>
NOTE
The send-cfg-all command copies all existing configuration parameters except Mesh settings, LAN
IP data, WAN IP data and DHCP Server parameter information.
For information on copying the access point config to another access point using the applet (GUI),
see
“Viewing known access point statistics” on page 196.
BR5181>admin(stats)> clear
Description
Clears the specified statistics counters to zero to begin new data calculations.
Syntax
send-cfg-all Copies the Mobility 5181 Access Point’s configuration to all of the Mobility 5181 Access Points
within the known AP table.
clear wan Clears WAN statistics counters.
lan Clears LAN statistics counters for specified LAN index (either clear lan 1 or clear lan 2).
all-rf Clears all RF data.
all-wlan Clears all WLAN summary information.
wlan Clears individual WLAN statistic counters.
all-radio Clears Mobility 5181 Access Point radio summary information.
radio1 Clears statistics counters specific to radio1.
radio2 Clears statistics counters specific to radio2.