Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 299)

Brocade Mobility 5181 Access Point Product Reference Guide 285
53-1002516-01
Network Commands
8
Network Firewall Commands
BR5181>admin(network.firewall)>
Description
Displays the Mobility 5181 Access Point firewall submenu. The items available under this
command include:
BR5181>admin(network.firewall)> show
Description
Displays the Mobility 5181 Access Point firewall parameters.
Syntax
Example
admin(network.firewall)>show
Firewall Status : disable
NAT Timeout : 10 minutes
Configurable Firewall Filters:
ftp bounce attack filter : enable
syn flood attack filter : enable
unaligned ip timestamp filter : enable
source routing attack filter : enable
winnuke attack filter : enable
seq num prediction attack filter : enable
mime flood attack filter : enable
max mime header length : 8192 bytes
max mime headers : 16 headers
For information on configuring the Firewall options available to the access point using the applet
(GUI), see
“Configuring firewall settings” on page 146.
show Displays the Mobility 5181 Access Point’s current firewall configuration.
set Defines the Mobility 5181 Access Point’s firewall parameters.
access Enables/disables firewall permissions through the LAN and WAN ports.
advanced Displays interoperaility rules between the LAN and WAN ports.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show Shows all Mobility 5181 Access Point’s firewall settings.