Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) User Manual
Page 53
Brocade Mobility 5181 Access Point Product Reference Guide
39
53-1002516-01
Basic device configuration
3
The System Name is useful if multiple devices are being administered.
3. Select the Country for the Mobility 5181 Access Point’s country of operation from the
drop-down menu
The access point prompts the user for the correct country code on the first login. A warning
message also displays stating that an incorrect country settings may result in illegal radio
operation. Selecting the correct country is central to legally operating the access point. Each
country has its own regulatory restrictions concerning electromagnetic emissions and the
maximum RF signal strength that can be transmitted. To ensure compliance with national and
local laws, be sure to set the country accurately. CLI and MIB users cannot configure their
access point until a two character country code (for example, United States - us) is set. Refer to
on page 397 for the two character country codes.
NOTE
The System Name and Country are also configurable within the System Settings screen. Refer
to
on page 45 (if necessary) to set a system location and admin
email address for the Mobility 5181 Access Point or to view other default settings.
4. Optionally enter the IP address of the server used to provide system time to the Mobility 5181
Access Point within the Time Server field.