Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 102)

88 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Updating device firmware
4
3. Configure the DHCP Options checkboxes to enable/disable automatic firmware and/or
configuration file updates.
DHCP options are used for out-of-the-box rapid deployment for Brocade wireless products. The
following are the two options available on the access point:
• Enable Automatic Firmware Update
• Enable Automatic Configuration Update
Both DHCP options are enabled by default.
These options can be used to update newer firmware and configuration files on the access
point.
The update is conducted over the LAN or WAN port depending on which server responds first to
the access point’s request for an automatic update.