Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 266)

252 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
server Sets the Kerberos server
(1-primary,
2-backup, or 3-remote) to
KDC IP address.
port Sets the Kerberos port to
(KDC port) for
server
(1-primary, 2-backup, or
3-remote).
Note: EAP parameters
are only in affect if "eap"
is specified for the
authentication method
(set auth ).
eap server Sets the radius server
(1-primary or as
2-secondary) IP address
.
port Sets the radius server
(1-primary or
2-secondary)
(1-65535).
secret Sets the EAP shared
secret (1-63
characters) for server
(1-primary or
2-secondary).
reauth mode Enables or disables EAP
reauthentication.
period Sets the reauthentication
period in
seconds (30-9999).
retry Sets the maximum
number of
reauthentication retries
(1-99).
accounting mode Enable or disable Radius
accounting.
server Set external Radius
server IP address.
port Set external Radius
server port number.