Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 362)

348 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
System Commands
8
BR5181>admin(system.fw-update)>show
Description
Displays the current Mobility 5181 Access Point firmware update settings.
Syntax
Example
admin(system.fw-update)>show
automatic firmware upgrade : enable
automatic config upgrade : enable
firmware filename : APFW.bin
firmware path : /tftpboot/
ftp/tftp server ip address : 168.197.2.2
ftp user name : jsmith
ftp password : *******
For information on updating access point device firmware using the applet (GUI), see “Updating
device firmware” on page 86.
BR5181>admin(system.fw-update)>set
Description
Defines Mobility 5181 Access Point firmware update settings and user permissions.
Syntax
admin(system.fw-update)>set fw-auto enable
admin(system.fw-update)>set cfg-auto enable
admin(system.fw-update)>set file 2.0.0.0-29D
admin(system.fw-update)>set path c:/fw
admin(system.fw-update)>set server 157.235.111.22
show Shows the current system firmware update settings for the Mobility 5181 Access Point.
set fw-auto When enabled, updates device firmware each time the firmware versions are found to
be different between the Mobility 5181 Access Point and the specified firmware on the
remote system.
cfg-auto When enabled, updates device configuration file each time the confif file versions are
found to be different between the Mobility 5181 Access Point and the specified LAN or
WAN interface.
file Defines the firmware file name (1 to 39 characters).
path Specifies a path for the file (1 to 39 characters)..
server The IP address for the FTP/TFTP server used for the firmware and/or config file update.
user Specifies a username for FTP server login (1 to 39 characters).
passwd ord> Specifies a password for FTP server login (1 to 39 characters). Default is admin.