Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 307)

Brocade Mobility 5181 Access Point Product Reference Guide 293
53-1002516-01
System Commands
8
System Commands
BR5181>admin(system)>
Description
Displays the System submenu. The items available under this command are shown below.
BR5181>admin(system)>restart
Description
Restarts the Mobility 5181 Access Point access point.
Syntax
restart Restarts the Mobility 5181 Access Point.
show Shows Mobility 5181 Access Point system parameter settings.
set Defines Mobility 5181 Access Point system parameter settings.
lastpw Displays last debug password.
exec Goes to a Linux command menu.
arp Dispalys the access point’s arp table.
aap-setup Goes to the Adaptive AP Settings submenu.
access Goes to the Mobility 5181 Access Point access submenu where Mobility 5181 Access Point access
methods can be enabled.
cmgr Goes the Certificate Manager submenu.
snmp Goes to the SNMP submenu.
userdb Goes to the user database submenu.
radius Goes to the Radius submenu.
ntp Goes to the Network Time Protocol submenu.
logs Displays the log file submenu.
config Goes to the configuration file update submenu.
fw-update Goes to the firmware update submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
restart Restarts the Mobility 5181 Access Point.