Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 324)

310 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
System Commands
8
System SNMP Access Commands
BR5181>admin(system.snmp.access)
Description
Displays the SNMP Access menu. The items available under this command are shown below.
BR5181>admin(system.snmp.access)> show
Description
Shows the SNMP v3 engine ID.
Syntax
Example
admin(system.snmp.access)>show eid
Mobility 5181 Access Point snmp v3 engine id :
000001846B8B4567F871AC68
admin(system.snmp.access)>
For information on configuring SNMP access settings using the applet (GUI), see “Configuring
SNMP access control” on page 68.
BR5181>admin(system.snmp.access)> add
Description
Adds SNMP access entries for specific v1v2 and v3 user definitions.
show Shows SNMP v3 engine ID.
add Adds SNMP access entries.
delete Deletes SNMP access entries.
list Lists SNMP access entries.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show eid Shows the SNMP v3 Engine ID.