Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 353)

Brocade Mobility 5181 Access Point Product Reference Guide 339
53-1002516-01
System Commands
8
Syntax
Example
admin(system.ntp)>set mode enable
admin(system.ntp)>set server 1 203.21.37.18
admin(system.ntp)>set port 1 123
admin(system.ntp)>set intrvl 15
admin(system.ntp)>set zone 1
For information on configuring NTP using the applet (GUI), see “Configuring Network Time Protocol
(NTP)” on page 76.
set mode Enables or disables NTP.
server Sets the NTP sever IP address.
port Defines the port number.
intrvl Defines the clock synchronization interval used between the Mobility 5181 Access
Point and the NTP server in minutes (15 - 65535).
time Sets the current system time. [yyyy] - year, [mm] - month, [dd] - day of the month, [hh]
- hour of the day, [mm] - minute, [ss] second, [zone -idx] Index of the zone.
zone Defines the time zone (by index) for the target country.