Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 228)

214 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
Network LAN, DHCP Commands
BR5181>admin(network.lan.dhcp)>
Description
Displays the Mobility 5181 Access Point DHCP submenu. The items available are displayed below.
BR5181>admin(network.lan.dhcp)> show
Description
Shows DHCP parameter settings.
Syntax
Example
admin(network.lan.dhcp)>show
**LAN1 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address : 192.168.0.100
Ending IP Address : 192.168.0.254
Lease Time : 86400
**LAN2 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address : 192.168.0.100
Ending IP Address : 192.168.0.254
Lease Time : 86400
For information on configuring DHCP using the applet (GUI), see “Configuring the LAN interface” on
page 93.
show Displays DHCP parameters.
set Sets DHCP parameters.
add Adds static DHCP address assignments.
delete Deletes static DHCP address assignments.
list Lists static DHCP address assignments.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI and exits the session.
show Displays DHCP parameter settings for the Mobility 5181 Access Point. These parameters are defined with
the set command.