Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 287)

Brocade Mobility 5181 Access Point Product Reference Guide 273
53-1002516-01
Network Commands
8
Syntax
For information on configuring the WLAN QoS options available to the access point using the applet
(GUI), see
“Setting the WLAN Quality of Service (QoS) policy” on page 111.
BR5181>admin(network.wireless.qos)> delete
Description
Removes a QoS policy.
Syntax
For information on configuring the WLAN QoS options available to the access point using the applet
(GUI), see
“Setting the WLAN Quality of Service (QoS) policy” on page 111.
show Displays QoS policy parameters.
set qos-name Sets the QoS name for the specified index entry.
vop Enables or disables support (by index) for legacy
VOIP devices.
mcast Defines primary and secondary Multicast MAC
address.
wmm-qos Enables or disables the QoS policy index
specified.
param-set Defines the data type used with the qos policy
and mesh network. When set to a value other
then manual, editing the access category values
is not necessary. Options include; 11g-default,
11b-default, 11g-wifi, 11b-wifi, 11g-voice,
11b-voice or manual for advanced users).
cwmin category> Defines Minimum Contention Window (CW-Min)
for specified access categoiry and index.
cwmax category> Defines Maximum Contention Window (CW-Max)
for specified access categoiry and index.
aifsn category> Sets Arbitrary Inter-Frame Space Number (AIFSN)
for specified access categoiry and index.
txops category> Configures Opportunity to Transmit Time (TXOPs
Time) for specified access categoiry and index.
default Defines CWMIN, CWMAX, AIFSN and TXOPs
default values.
change Completes the policy edit and exits the session.
.. Cancels the changes and exits.
delete Deletes the specified QoS polciy index, or all of the policies (except default policy).